Part Numbers 
WCT 100 – WCT 135 – WCSS 200

• Model WCT 100 – Cuts hose through 1 inch diameter
  Small cutter – cuts P.E., P.B. & PVC (Class and Schedule 40)
• Model WCT 135 – Cuts Hose through 1-1/2 inch diameter
  Large cutter – cuts P.E. & hose through 1-1/2″ I.D.. Class PVC & P.B. Through 1-1/4″ I.D.
• Model WCSS 200 – Cuts hose through 2 inch diameter
  Largest cutter – cuts hose through 2″ I.D., P.E. through 1-1/2″ & Class PVC through 1-1/4″ I.D. (Comes standard with Stainless Steel Blade)

INSTRUCTIONS 

Plastic Pipe:

• Place cutter on pipe as illustrated.
• Lightly squeeze and rotate cutter. Rotate cutter up and down.
• Cut slowly at end of cut.

Rubber hose or soft tubing:

• Place cutter on hose as illustrated.
• Squeeze handles. (Slight rotation might be needed to start the cut.)

Precautions:

• Do not cut metal or anything harder than plastic.
• Do not twist or pull handles parallel to the pipe.
• Avoid squeezing hard (Especially in cold weather) – Do not snap cut PVC – cut slowly at the end of the cut while rotating the cutter.
• Caution: Blade is very sharp. Keep away from children.